In order to combine the Heart cup chain connector in the necklace i need to take out one setting of the 33 settings of the necklace, so i can replace it with the Heart connector
I cut the bars of the central setting so now i have to equal parts of the 39ss Necklace
I put one of the pins of the Heart connector inside the hall of the cup chain setting the way it is shown in the pictures
The next step is securing the connector In order to keep it inside so it won't fall out of the setting
I do it by splitting the end of the pin while it is inside
the setting of the cup chain
The action is shown in the picture outside of the setting just to show you how to split the end
of the pin
I repeat the same action with the other side of the Heart connector to connect the two pieces of cup chain to one necklace
I connect the 39ss setting base with top loop to the Bottom loop of the Heart connector using a 5mm jump ring and a plier tool
The next step is connecting the extantion chain to the loop on the left side of the necklace with a 5mm jump ring
I connect the clasp to the loop on the right side of the necklace with a 5mm jump ring
The last step is setting the stones
I Place the stone in the Center of the stone setting and with the help of the setting tool
bend the prongs towards the stone in order
to embed it
In this Necklace i used A variety of Romantic Swarovski colors you can choose you own combination of colors
Hope you enjoyed the process!
